RICOH T echnical B ulletin PAGE: 1/3 Model: PRIPORT SILVER Date: 31-Dec-98 No: 01 Subject: Firmware Modification History Prepared by: H. Kokubo, Priport Service Planning Section Part information Electrical Transmit/receive Classification: Troubleshooting Mechanical Paper path Other ( ) Action required Service manual revision Retrofit information Model Name: SILVER: Ricoh JP1010/1030/1045/1050, Gestetner 5306(L/b)/5000/5001, RexRotary 1224(B), nashuatec CP306(b), SVN 3150DNP This bulletin is to inform you of the firmware modification history of PRIPORT SILVER. Refer to the table below for the modification history. (For the new SP modes SP18 and 19, add the information to you service manual.) FIRMWARE MODIFICATION HISTORY No. Part Numbers Description Month Affected From the start of mass- production November ’98 production Remarks 1 ROM: C231 5105-E MPU: C231 5100-F ROM : C231 5105-K MPU: C231 5100-L · SP45 ‘Standard Image Position at Power-on’ has been changed from a customer accessible item to a non-accessible item. This version is the mass- production release. 2 · SP18 ‘Master Selection’ has been added. This item is only for the Japanese version. (SP18 must be set at ‘0’ for the other versions. ‘0’ is the default.) · SP19 has been added. By switching this item to ‘1,’ the Edge Erase mode for B5 size originals is always selected when the Combine 2 Originals mode is used. (This erases the shadows along the edge of the original for prints in the Combine 2 Originals mode.)
Page 1 of 69

Compatible Models: Ricoh-JP1010.
– Ricoh-JP1010 Technical-Bulletin: is a handbook published by Ricoh manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Ricoh-JP1010 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Ricoh-JP1010 Technical-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Ricoh-JP1010 Technical-Bulletin.
1.3 Diagnostic all errors are generated by Ricoh-JP1010 Technical-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Ricoh-JP1010.
1.5 How to update firmware Ricoh-JP1010.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Ricoh-JP1010: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Ricoh-JP1010.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Ricoh-JP1010 Technical-Bulletin covers following topics:

– Precautions Ricoh-JP1010.
– Product Specification Ricoh-JP1010.
– System Overview Ricoh-JP1010.
– S/W Structure and Descriptions Ricoh-JP1010.
– Disassembly and Reassembly Ricoh-JP1010.
– Alignment and Adjustments Ricoh-JP1010.
– Troubleshooting Ricoh-JP1010.
– Exploded Views & Parts List Ricoh-JP1010.

Free Download Ricoh-JP1010 Technical-Bulletin

Ricoh-JP1010 Technical-Bulletin

Leave a Reply