Technical-Bulletin-Ricoh-FT4422

Technical Bulletin No. RTB-001 SUBJECT: Condor Manual Correction DATE: May 31, ’96 PAGE: 1 of 2 PREPARED BY: M. Ishihara CHECKED BY: FROM: 1st Field Information Dept. QAC CLASSIFICATION: Action Required Troubleshooting Retrofit Information Revision of service manual Information only Other MODEL: Condor 1. Please correct your service manual as follows: Incorrect Description (Duplex Copying) A4/11" x 8 1/2" Correct Description None (This machine does not have duplex mode.) between CN121-7 and CN121-8 becomes too low Erase Edge mode ( Function key + " 3 " + R/# key) or Erase Center and Edge mode ( Function key + " 5 " + R/# key) If "manual" is selected, copying stops, even if the other station has the same paper size. Erase Center mode ( Function key + " 4 " + R/# key) or Erase Center and Edge mode ( Function key + " 5 " + R/# key) Location Page 1-1, 10th row between CN121-7 and CN121-87 becomes too low Erase Edge mode ( Program key + " 7 " + R/# key) or Erase Center and Edge mode ( Program key + " 8 " + R/# key) If "manual" is selected, copying stops if the other station does not have the same paper size. Erase Center mode ( Program key + " 6 " + R/# key) or Erase Center and Edge mode ( Program key + " 8 " + R/# key) Refer to 6.5.4 Toner Saver Mode Refer to 5.4 of section 2 , Toner Page 2-59, 3rd row Page 4-14, "Function" column of SP13 and SP18 Page 4-14, "Function" column of SP17 Page 4-15, "Function" column of SP26 Saver Mode Page 4-16, "Function" column of SP36 Page 4-16, "Settings" column of SP38 Page 4-17, "Settings" column of SP48 Page 4-22, "Function" column of SP98 and SP99 1: No 2: Yes 0: No 1: Yes ( 115 V machines = 63 V) ( 110 V machines = 63 V) See section 2.1.2 See section 2.1.3
Page 1 of 2

Compatible Models: Ricoh-FT4422.
– Ricoh-FT4422 Technical-Bulletin: is a handbook published by Ricoh manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Ricoh-FT4422 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Ricoh-FT4422 Technical-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Ricoh-FT4422 Technical-Bulletin.
1.3 Diagnostic all errors are generated by Ricoh-FT4422 Technical-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Ricoh-FT4422.
1.5 How to update firmware Ricoh-FT4422.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Ricoh-FT4422: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Ricoh-FT4422.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Ricoh-FT4422 Technical-Bulletin covers following topics:

– Precautions Ricoh-FT4422.
– Product Specification Ricoh-FT4422.
– System Overview Ricoh-FT4422.
– S/W Structure and Descriptions Ricoh-FT4422.
– Disassembly and Reassembly Ricoh-FT4422.
– Alignment and Adjustments Ricoh-FT4422.
– Troubleshooting Ricoh-FT4422.
– Exploded Views & Parts List Ricoh-FT4422.

Free Download Ricoh-FT4422 Technical-Bulletin

Ricoh-FT4422 Technical-Bulletin

Leave a Reply