Technical-Bulletin-Ricoh-AFC-6010-6110

T echnical B ulletin PAGE: 1/1 Model: Cattleya Date: 15-Jun-99 No.: RA257001 Subject: Silicone Oil for the Fusing Unit From: Technical Service Dept., GTS Division Classification: Troubleshooting Mechanical Paper path Other ( ) Prepared by: H. Matsui Part information Electrical Transmit/receive Action required Service manual revision Retrofit information For the Cattleya fusing unit, “Silicone Oil Type SS” P/No. A2579100 should be used. Please correct your service manual as follows: Page 3 -16 After “Step 3”, please add the following: NOTE: “Silicone Oil Type SS” P/No. A2579100 should be used for this copier. Page 5 - 9 In the PM table for the fusing unit, please add the following remarks for the column on silicone oil: Remarks: “Silicone Oil Type SS” P/No. A2579100 should be used. CAUSE One of the features of the new silicone oil is its (small amount of) low molecular “siloxane”. This has an effect on the volatility of the oil. At around 150 ° C, the volatility of the new silicone oil is about 1/3 that of the previous silicone oil. This feature prevents the charge corona wire from getting soiled by the vaporized silicone oil. However, the lubrication properties of this new silicone oil are the same as those of the old type. For Cattleya, be sure to use the new type of silicone oil. The new silicone oil has been used from the first step of the development of Cattleya and therefore the machine is not designed to operate using the old type of oil. Consequently, it is impossible to predict the performance under the old type of oil (there are no tests on this available). NOTE: 1. ”Siloxane” is the name of a chemical compound, which consists of silicon and oxygen. 2. The lubrication properties of a mix between the old and new oils would remain unaffected. However, the advantage of the new silicone oil over the older type is that the low volatility will be lost.
Page 1 of 149

Compatible Models: Ricoh-AFC-6010-6110.
– Ricoh-AFC-6010-6110 Technical-Bulletin: is a handbook published by Ricoh manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Ricoh-AFC-6010-6110 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Ricoh-AFC-6010-6110 Technical-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Ricoh-AFC-6010-6110 Technical-Bulletin.
1.3 Diagnostic all errors are generated by Ricoh-AFC-6010-6110 Technical-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Ricoh-AFC-6010-6110.
1.5 How to update firmware Ricoh-AFC-6010-6110.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Ricoh-AFC-6010-6110: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Ricoh-AFC-6010-6110.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Ricoh-AFC-6010-6110 Technical-Bulletin covers following topics:

– Precautions Ricoh-AFC-6010-6110.
– Product Specification Ricoh-AFC-6010-6110.
– System Overview Ricoh-AFC-6010-6110.
– S/W Structure and Descriptions Ricoh-AFC-6010-6110.
– Disassembly and Reassembly Ricoh-AFC-6010-6110.
– Alignment and Adjustments Ricoh-AFC-6010-6110.
– Troubleshooting Ricoh-AFC-6010-6110.
– Exploded Views & Parts List Ricoh-AFC-6010-6110.

Free Download Ricoh-AFC-6010-6110 Technical-Bulletin

Ricoh-AFC-6010-6110 Technical-Bulletin

Leave a Reply