Service Bulletin KMIS Service Department, Kyocera Mita Europe 8208 / SB 3JT-003 Page of SB Number: SB 3JT-003 Creation Date: 17/04/2008 Subject: Model: Firmware upgrade (new manufacturer of flash ROM) Printing system (V) Field measure Please make sure that the latest firmware has been installed on the Spansion DIMM, so both old and new DIMM can be used. Parts No. Old Parts No. New Parts No. Description Q’TY Interchange- ability New Old 1 O SP Old 1 New O 1 303JT01020 3JT01020 303JT01021 3JT01021 PCB DIMM ASS’Y WITH SOFTWARE O Latest firm - ware as of September 2007 Type PRINTER MAIN Program No. 2FB_3F00.005.002 Check SUM Version 5563 Status Date 20/06/2007 005.002 Affected serial numbers Type Printing system (V) Serial number ALW3014276 and higher Contents of changes Item Changed flash ROM used on the code DIMM Contents The manufacturer of the flash ROM on the DIMM has been changed from Fujitsu to Spansion. In order to use the new DIMM the firmware has been changed. The old DIMM can also be used with the new firmware. 1
Page 1 of 1

Compatible Models: Kyocera-PrintSystemV.
– Kyocera-PrintSystemV Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-PrintSystemV Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-PrintSystemV Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-PrintSystemV Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-PrintSystemV Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-PrintSystemV.
1.5 How to update firmware Kyocera-PrintSystemV.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-PrintSystemV: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-PrintSystemV.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-PrintSystemV Service-Bulletin covers following topics:

– Precautions Kyocera-PrintSystemV.
– Product Specification Kyocera-PrintSystemV.
– System Overview Kyocera-PrintSystemV.
– S/W Structure and Descriptions Kyocera-PrintSystemV.
– Disassembly and Reassembly Kyocera-PrintSystemV.
– Alignment and Adjustments Kyocera-PrintSystemV.
– Troubleshooting Kyocera-PrintSystemV.
– Exploded Views & Parts List Kyocera-PrintSystemV.

Free Download Kyocera-PrintSystemV Service-Bulletin

Kyocera-PrintSystemV Service-Bulletin

Leave a Reply