KMIS Service Department, Kyocera Mita Europe 8812 / SB PF-019 Service Bulletin Page 1 of 2 SB Number: SB PF-019 Creation Date: 10/12/2009 Subject: Model: Paper jam J12 at the paper feed-in PF-750/760 Classification Field measure When the above mentioned phenomenon occurs, please replace H-SFT-normal rotation 305A70707481 with 305A70707482 and add FLNG-MOT-KY 305H080610. Entire stock rework In-field modification at next visit No modification necessary In-field modification by case X Parts No. Old Parts No. New Parts No. Description Q’TY Interchange - ability New Old 1 O SP Old 1 New O 1 305A707481 5A707481 305H080610 5H080610 305A707482 5A707482 305H080610 5H080610 H-SFT-NORMAL ROTATION FLNG-MOT-KY - 2 1 2 - X - Type PF-750/760 Machines produced after the above mentioned production date, should not have the above mentioned phenomenon. Serial number April 2009 production Serial numbers of affected machines Phenomenon Paper jam J12 may occur at the paper feed-in. Cause The belt (beltS3M048040 305H080240) may disengage from the pulley (pulley-S3M-18-OW 54106280). Solution The following changes have been made: 1. A flange (FLNG-MOT-KYO 305H080610) has been added to ensure that the belt can not disengage. 2. Due to the above mentioned change, the shape of the shaft (H-SFT-normal rotation 305A707481) has been changed. Affected models PF-750: KM-3050/4050/5050, KM-C2520/3225/3232/3225E/3232E/4035E PF-760: TASKalfa250ci/300ci/400ci/500ci
Page 1 of 2

Compatible Models: Kyocera-PF-750-760.
– Kyocera-PF-750-760 Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-PF-750-760 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-PF-750-760 Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-PF-750-760 Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-PF-750-760 Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-PF-750-760.
1.5 How to update firmware Kyocera-PF-750-760.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-PF-750-760: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-PF-750-760.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-PF-750-760 Service-Bulletin covers following topics:

– Precautions Kyocera-PF-750-760.
– Product Specification Kyocera-PF-750-760.
– System Overview Kyocera-PF-750-760.
– S/W Structure and Descriptions Kyocera-PF-750-760.
– Disassembly and Reassembly Kyocera-PF-750-760.
– Alignment and Adjustments Kyocera-PF-750-760.
– Troubleshooting Kyocera-PF-750-760.
– Exploded Views & Parts List Kyocera-PF-750-760.

Free Download Kyocera-PF-750-760 Service-Bulletin

Kyocera-PF-750-760 Service-Bulletin

Leave a Reply