KMIS Service Department, Kyocera Mita Europe 8869 / SB 2GR-032 Service Bulletin Page of 2 SB Number: SB 2GR-032 Creation Date: 01/10/2009 Subject: Common use of parts at the paper cassette KM-3050/4050/5050, KM-C2520/3225/3232/2525E/3232E/4035E, PF-700/710 Model: Classification Field measure Please do not mix old with new parts, when replacing the parts. Entire stock rework In-field modification at next visit No modification necessary In-field modification by case X Parts No. Old Parts No. New Parts No. Description Q’TY Interchange - ability New Old 2 X SP Old 2 New X 1 302FG07151 2FG07151 302GR34032 2GR34032 302FG07170 2FG07170 302FG07180 2FG07180 302FG07230 2FG07230 302H009110 2H009110 302FZ09141 2FZ09141 ---------- CURSOR C CASSETTE O 2 LABEL PAPER SIZE R1 2 2 X X O 3 FRONT GUIDE C,CURSOR 2 - X - O 4 ---------- REAR GUIDE C,CURSOR 2 - X - O 5 ---------- STOPPER,TRAILING EDGE DETECTION 2 - X - O Affected serial numbers Type KM-3050/4050/5050, KM-C2520/3225/ 3232/2525E/3232E/4035E, PF-700/710 Serial number Not available Phenomenon To make the parts at the paper cassette common with other models, the following changes have been made: 1. The material of the cursor C cassette 302H009110 has been changed from metal to plastic. 2. The paper guide lines at the label paper size R1 302FZ09141 have been shifted 3mm to the right, due to the increased thickness of the new cursor C cassette. 3. Based on the above mentioned changes, the following parts have been discontinued: • Front guide C,cursor 302FG07170 • Rear guide C,cursor 302FG07180 • Stopper,trailing edge detection 302FG07230 Affected models PF-700: KM-3050/4050/5050 PF-710: KM-C2520/3225/3232/2525E/3232E/4035E
Page 1 of 6

Compatible Models: Kyocera-PF-700-710-750.
– Kyocera-PF-700-710-750 Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-PF-700-710-750 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-PF-700-710-750 Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-PF-700-710-750 Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-PF-700-710-750 Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-PF-700-710-750.
1.5 How to update firmware Kyocera-PF-700-710-750.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-PF-700-710-750: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-PF-700-710-750.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-PF-700-710-750 Service-Bulletin covers following topics:

– Precautions Kyocera-PF-700-710-750.
– Product Specification Kyocera-PF-700-710-750.
– System Overview Kyocera-PF-700-710-750.
– S/W Structure and Descriptions Kyocera-PF-700-710-750.
– Disassembly and Reassembly Kyocera-PF-700-710-750.
– Alignment and Adjustments Kyocera-PF-700-710-750.
– Troubleshooting Kyocera-PF-700-710-750.
– Exploded Views & Parts List Kyocera-PF-700-710-750.

Free Download Kyocera-PF-700-710-750 Service-Bulletin

Kyocera-PF-700-710-750 Service-Bulletin

Leave a Reply