KMIS Service Department, Kyocera Mita Europe 9028 / SB 2H0-025 Service Bulletin Page of SB Number: SB 2H0-025 Creation Date: 19/11/2009 Subject: Vertical paper feed jam J18 due to reduced surface of the vertical feed rollers KM-2540/3040/2560/3060, PF-670 Model: Classification Field measure When the above mentioned phenomenon occurs, please replace the vertical feed rollers with the latest type. Entire stock rework In-field modification at next visit No modification necessary In-field modification by case Parts No. Old Parts No. New Parts No. Description Q’TY Interchange - ability New Old 1 X SP Old 1 New O 1 302H093081 2H093081 302H094090 2H094090 302H094100 2H094100 302H093082 2H093082 302H094091 2H094091 302H094101 2H094101 PARTS VERTICAL FEEED UNIT +PARTS ROLLER VERTICAL FEED A SP +PARTS ROLLER VERTICAL FEED B SP (KM-2540/3040/2560/3060 only) O 2 1 1 X O O 3 1 1 X O O Type KM-2540/3040/2560/3060/PF-670 Serial number Not available Serial numbers of affected machines Phenomenon Vertical paper feed jam J18 may occur in the beginning of a print job of 8.000 to 10.000 sheets, depending on which paper type is used. Cause The surface of the vertical feed rollers (parts roller vertical feed A SP and parts roller vertical feed A SP) decreases to the point that paper can no longer be fed properly. Solution The vertical feed rollers have been changed to ensure proper contact with the paper. To recognize the difference between the vertical feed rollers, the colour of the latest type is lighter grey then the old type. Affected models: PF-670: KM-2540/3040/2560/3060 Old condition of the vertical feed roller New condition of the vertical feed rollers (lighter colour)
Page 1 of 1

Compatible Models: Kyocera-PF-670.
– Kyocera-PF-670 Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-PF-670 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-PF-670 Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-PF-670 Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-PF-670 Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-PF-670.
1.5 How to update firmware Kyocera-PF-670.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-PF-670: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-PF-670.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-PF-670 Service-Bulletin covers following topics:

– Precautions Kyocera-PF-670.
– Product Specification Kyocera-PF-670.
– System Overview Kyocera-PF-670.
– S/W Structure and Descriptions Kyocera-PF-670.
– Disassembly and Reassembly Kyocera-PF-670.
– Alignment and Adjustments Kyocera-PF-670.
– Troubleshooting Kyocera-PF-670.
– Exploded Views & Parts List Kyocera-PF-670.

Free Download Kyocera-PF-670 Service-Bulletin

Kyocera-PF-670 Service-Bulletin

Leave a Reply