SB Number: SB 5H6-001 01/12/2006 Subject: Model: The MK contains assembled items (units), while the PM and SK contain individual spare part items. MK (SK) content list KM-3650w Service Bulletin MFP kits - Maintenance KMIS Service Team, Kyocera Mita Europe SB 5H6-001 Machine Kit Code Item Name Item Code Qty The way to use the MK, PM kits and SK's is as follows: somewhat unclear, we have compiled a list describing the contents, item codes and maintenance intervals of the various kits. All described parts without an item code will not be available as individual parts. Kits that have no specified mainte - nance interval (Developer Seal Kit) are to be used ‘on demand’. Machine Kit Name Kit Code Item Name Item Code Qty Maint.interval KM-3650W Developer maintenance kit A DV-950A 305H670041 N/A N/A N/A 1 1 2 2 18000 meter Roller supply Sheet 5 Sheet 6 Developer maintenance kit B DV-950B 305H670031 N/A N/A N/A 305H680480 305H680490 305H680500 1 1 2 2 1 1 1 36000 meter Roller Developer (UV) Sheet 3 Sheet 4 Seal L Assy Seal R Assy Scraper Start up kit Start up kit 950 Starting toner (500 grams) 1T05H60N10 1 at installation Toner cartridge kit TK-950 Toner cartridge (400 grams) 1T05H60N20 2 --- Corona wire kit MC-950 305H670010 305H680440 305H680450 1 1 2 18000 meter Corona wire assy (1) Corona wire Filter kit SK-950 305H670020 305H680460 305H680470 1 1 2 36000 meter Filter Filter 2 Fuser maintenance kit FK-950 305H670050 305H680510 305H680520 305H679940 305H679930 1 1 2 36000 meter Roller fusing Bush Nail stripping Nail lower 13 6 Developer seal kit Developer seal kit 305H670061 N/A N/A 305H680480 305H680490 N/A N/A 1 2 2 1 1 2 2 --- Sheet 3 Sheet 4 Seal L assy Seal R assy Sheet 5 Sheet 6 Photoconductive drum DK-950 Drum assy 305H670070 1 36000 meter times with the PM kit parts. NOTE: If the individual spare parts included in the SK, are not included in the MK, it is necessary to check the cycle / lifetime of this individual SK. In this case, the cycle/life of the SK is not necessarily the same as that of the MK. How to use? Because the information regarding the Maintenance (Service) Kits for the new KM-3650w wide format model was
Page 1 of 21

Compatible Models: Kyocera-KM-3650w.
– Kyocera-KM-3650w Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-KM-3650w Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-KM-3650w Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-KM-3650w Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-KM-3650w Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-KM-3650w.
1.5 How to update firmware Kyocera-KM-3650w.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-KM-3650w: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-KM-3650w.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-KM-3650w Service-Bulletin covers following topics:

– Precautions Kyocera-KM-3650w.
– Product Specification Kyocera-KM-3650w.
– System Overview Kyocera-KM-3650w.
– S/W Structure and Descriptions Kyocera-KM-3650w.
– Disassembly and Reassembly Kyocera-KM-3650w.
– Alignment and Adjustments Kyocera-KM-3650w.
– Troubleshooting Kyocera-KM-3650w.
– Exploded Views & Parts List Kyocera-KM-3650w.

Free Download Kyocera-KM-3650w Service-Bulletin

Kyocera-KM-3650w Service-Bulletin

Leave a Reply