KMIS Service Team, Kyocera Mita Europe 5908 / SB 2BJ-03 8 Service Bulletin SB Number: SB 2BJ-03 8 Creation Date: 06/12/2004 Subject: Model: LSU change (addition capacitor) KM-2530 / 3530, KM-4030, FS-9100DN / 9500DN Phenomenon & Cause The polygon motor may vary in rotation by the influence of noise. As a result, a wavy image may arise or C4010 (= Polygon motor steady-state problem) may appear. Countermeasure The capacitor 220pF has been added to the PCB for polygon motor to improve the tolerance for noise. Field Measure If the phenomenon arises, please replace the old with the new LSU. As for the distinction between the old and new LSU, please check the bar code number (separate production No. for LSU) attached to the LSU. (see below) Parts Table Part No. OLD NEW Q’ ty Interchange ability No. Part No. Description Old New 1 2BL93140 2BL93141 PARTS, LASER UNIT, LK700 1 1 X O 2 5PLPXHNAPKX ---------- PARTS, LASER UNIT, LK700 1 - X - NOTE : Affected Machine Serial Numbers: KM-2530: H3045853 and later KM-3530: J3036274 and later KM-4030: N3007547and later FS-9100DN: XRX2400788 and later FS-9500DN: XAJ3401700 and later Production No. for new LSU (addition of capacitor): GCE3105982 and later Please use the new part no. 1 (P/N: 2BL93141) as the new part for all mentioned models. 1 / 1
Page 1 of 105

Compatible Models: Kyocera-KM-3035-4035-5035.
– Kyocera-KM-3035-4035-5035 Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-KM-3035-4035-5035 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-KM-3035-4035-5035 Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-KM-3035-4035-5035 Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-KM-3035-4035-5035 Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-KM-3035-4035-5035.
1.5 How to update firmware Kyocera-KM-3035-4035-5035.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-KM-3035-4035-5035: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-KM-3035-4035-5035.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-KM-3035-4035-5035 Service-Bulletin covers following topics:

– Precautions Kyocera-KM-3035-4035-5035.
– Product Specification Kyocera-KM-3035-4035-5035.
– System Overview Kyocera-KM-3035-4035-5035.
– S/W Structure and Descriptions Kyocera-KM-3035-4035-5035.
– Disassembly and Reassembly Kyocera-KM-3035-4035-5035.
– Alignment and Adjustments Kyocera-KM-3035-4035-5035.
– Troubleshooting Kyocera-KM-3035-4035-5035.
– Exploded Views & Parts List Kyocera-KM-3035-4035-5035.

Free Download Kyocera-KM-3035-4035-5035 Service-Bulletin

Kyocera-KM-3035-4035-5035 Service-Bulletin

Leave a Reply