Service-Bulletin-Kyocera-FS-C8008N

SB Number: SB 2A6-047 Creation Date: 26/08/2005 Subject: Model: Measure against right angle misalignment, NEW PARTS KMC830/C830D, FS-8000C, KM-C850C850D, FS-C8008N Service Bulletin KIMS Service Team, Kyocera Mita Europe 6884 / SB 2A6-047 Phenomenon: If the pressure between the Upper and the Lower Registration Roller on the front side of the machine is different from the pressure on the backside of the machine, there is a possibility that the paper might be twisted between the Secondary Transfer Belt and the Upper and Lower Registration Roller and the image might be distorted. Contents of changes: To even out the pressure of the registration roller on the front and backside of machine, SPRING MIDDLE F (P/N: 2BM17350) has been adjusted and is now available as a completely new part; SPRING REG R (P/N: 2CK17830.) SPRING REG R has a lower tensile force and a different color compared to the standard SPRING MIDDLE F. Tensile force: (Old) 600gf (New) 400gf External color: (Old) Black (New) Brown On the following page you will find an illustration which shows you where the problem is located and which part is causing the problem. To cure this problem, please find out which part you need to replace in the information given below as it depends on which machine you are experiencing this problem with. No. Old Parts No. 302BM93015 2BM93015 302CK93161 2CK93161 New Parts No. 302BM93016 2BM93016 302CK93162 2CK93162 302A600238 2A600238 302CK17830 2CK17830 Description Q’ty Interchange ability SP Remarks Old New 1 FE-800(PAPER FEED UNIT) 1 1 X O O (1) 2 PARTS.FE-803(PAPER FEED) 1 1 X O O (2) 4 2A600237 CONVEYING UNIT ASS’Y 1 1 X O O (4) 3 2BM17350 +SPRING REG R 1 1 X O O (3) (1): FS-8000C (2): KM-C850/C850D, FS-C8008N (3): Total quantity of SPRING MIDDLE F (P/N: 2BM1735_): (4): KM-C830/C830D (Old) 2 (New) 1 (Attach to GUIDE MIDDLE.) Field Measure: If the problem arises, please replace No.3 with the new part. Affected Machine Serial Numbers: KM-C850/C850D: FS-C8008N (A3006490): Other spec.: KM-C830/C830D, FS-8000C: CHUNGHO: G3010674 and higher UTA4Y00077 and higher From the next production on No production now (CHUNGHO spec. machines are affected.)
Page 1 of 38

Compatible Models: Kyocera-FS-C8008N.
– Kyocera-FS-C8008N Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-FS-C8008N Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-FS-C8008N Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-FS-C8008N Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-FS-C8008N Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-FS-C8008N.
1.5 How to update firmware Kyocera-FS-C8008N.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-FS-C8008N: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-FS-C8008N.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-FS-C8008N Service-Bulletin covers following topics:

– Precautions Kyocera-FS-C8008N.
– Product Specification Kyocera-FS-C8008N.
– System Overview Kyocera-FS-C8008N.
– S/W Structure and Descriptions Kyocera-FS-C8008N.
– Disassembly and Reassembly Kyocera-FS-C8008N.
– Alignment and Adjustments Kyocera-FS-C8008N.
– Troubleshooting Kyocera-FS-C8008N.
– Exploded Views & Parts List Kyocera-FS-C8008N.

Free Download Kyocera-FS-C8008N Service-Bulletin

Kyocera-FS-C8008N Service-Bulletin

Leave a Reply