Service-Bulletin-Kyocera-FS-C5020N-5030N

SB Number: SB 2F3-001 Creation Date: 15/08/2005 Subject: Model: System and Engine Firmware upgrade (F030) FS-C5020N Service Bulletin KIMS Service Team, Kyocera Mita Europe 7109, 7190, 7135 / SB 2F3-001 The system firmware has been upgraded as follows. Contents of changes: System F/W upgrade: S2F3_3000003001 to S2F3_3000004001 Due to a high load of print jobs data may be distorted to prevent a memory error. Therefore the memory access timing has been slowed. Type Program Number Check SUM Version Remarks System S2F3_3000004001 1D0E 004.001 - Affected machine serial numbers: From April production on. System F/W upgrade: S2F3_3000004001 to S2F3_3000005006 1. Processing lock when printing a specific file in KPDL is corrected. 2. F030 error when printing a specific file continuously is corrected 3. F030 error when using macro in CF card is corrected. 4. Output of Thick media to face-down tray is enabled. (Change of specification) Type Program Number Check SUM Version Remarks System S2F3_3000005006 782B 005.006 - Field measure: If these problems arise, please upgrade the firmware. Affected machine serial numbers: FS-C5020N : ALH5504485 and higher. Engine F/W upgrade: S2F3_3000002004 to S2F3_3000003001 Contents of change: When, during feeding paper from the MP tray, a cover is opened sometimes an incorrect indication of error code 5301/5302/5303/5304 will occur.
Page 1 of 23

Compatible Models: Kyocera-FS-C5020N-5030N.
– Kyocera-FS-C5020N-5030N Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-FS-C5020N-5030N Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-FS-C5020N-5030N Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-FS-C5020N-5030N Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-FS-C5020N-5030N Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-FS-C5020N-5030N.
1.5 How to update firmware Kyocera-FS-C5020N-5030N.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-FS-C5020N-5030N: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-FS-C5020N-5030N.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-FS-C5020N-5030N Service-Bulletin covers following topics:

– Precautions Kyocera-FS-C5020N-5030N.
– Product Specification Kyocera-FS-C5020N-5030N.
– System Overview Kyocera-FS-C5020N-5030N.
– S/W Structure and Descriptions Kyocera-FS-C5020N-5030N.
– Disassembly and Reassembly Kyocera-FS-C5020N-5030N.
– Alignment and Adjustments Kyocera-FS-C5020N-5030N.
– Troubleshooting Kyocera-FS-C5020N-5030N.
– Exploded Views & Parts List Kyocera-FS-C5020N-5030N.

Free Download Kyocera-FS-C5020N-5030N Service-Bulletin

Kyocera-FS-C5020N-5030N Service-Bulletin

Leave a Reply