Service Bulletin KMIS Service Department, Kyocera Mita Europe 8389 / SB 2BJ-043 Page of SB Number: SB 2BJ-043 Creation Date: 12/06/2008 Subject: Model: Left cover feed has been changed to prevent paper Jam 21/22 FS-9100DN/9120DN/9130DN/9520DN/9530DN/9500DN Classification Field measure Replace left cover feed 302BL06101 with 302BL06102. Entire stock rework In-field modification at next visit No modification necessary In-field modification by case X Parts No. Old Parts No. New Parts No. Description Q’TY Interchange - ability New Old 1 X SP Old 1 New O 1 302GR93161 2GR93161 302BL06101 2BL06101 302GR93162 2GR93162 302BL06102 2BL06102 PARTS VERTICAL FEED UNIT LEFT COVER FEED O 2 1 1 2 O O Affected serial numbers Type FS-9100DN/9120DN/9130DN/9520DN/ 9530DN/9500DN Serial number From the production of March 2008 Phenomenon Continuous feeding of paper by the PF-75 may result in paper Jam 21 or 22. Cause This is caused by a sagging of the trail edge of the first sheet, resulting in that switch 2 mistakenly registers that this sheet has been fed through completely. Now the second sheet that’s being fed may overlap with the first sheet of paper, resulting in the paper jam. Solution The left cover feed has been changed to prevent Jam 21 or 22. See below for further details. 2 conveying ribs have been added to the left cover feed
Page 1 of 41

Compatible Models: Kyocera-FS-9130DN-9530DN.
– Kyocera-FS-9130DN-9530DN Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-FS-9130DN-9530DN Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-FS-9130DN-9530DN Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-FS-9130DN-9530DN Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-FS-9130DN-9530DN Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-FS-9130DN-9530DN.
1.5 How to update firmware Kyocera-FS-9130DN-9530DN.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-FS-9130DN-9530DN: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-FS-9130DN-9530DN.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-FS-9130DN-9530DN Service-Bulletin covers following topics:

– Precautions Kyocera-FS-9130DN-9530DN.
– Product Specification Kyocera-FS-9130DN-9530DN.
– System Overview Kyocera-FS-9130DN-9530DN.
– S/W Structure and Descriptions Kyocera-FS-9130DN-9530DN.
– Disassembly and Reassembly Kyocera-FS-9130DN-9530DN.
– Alignment and Adjustments Kyocera-FS-9130DN-9530DN.
– Troubleshooting Kyocera-FS-9130DN-9530DN.
– Exploded Views & Parts List Kyocera-FS-9130DN-9530DN.

Free Download Kyocera-FS-9130DN-9530DN Service-Bulletin

Kyocera-FS-9130DN-9530DN Service-Bulletin

Leave a Reply