Service-Bulletin-Kyocera-FS-720-820-920

KMIS Service Team, Kyocera Mita Europe 7064 / SB 2FV-001 Service Bulletin SB Number: SB 2FV-001 Creation Date: 24/02/2005 Subject: Model: Change of System firmware ( 2FV_3000.002.002/2FW_3000.002.003) FS-820, FS-920 Please be informed that the firmware for FS-820 / 920 has been upgraded as follows. CONTENTS OF CHANGES FS-820 Version Description Change of L4 default value 28 ->18 to adjust default left margin. (New value: L1 = 01, L2 = 13, L3 = 00, L4 = 18) Processing lock may occur when printing specific data. (Corrected) (Modification for raster process of True Type Font.) Special characters (logo, etc) may not be printed correctly. (Corrected) (Modification for calculation of width of the character.) Processing lock may occur when printing specific data from paper cassette in short edge direction. (Corrected: modification for calculation of line drawing.) Note: When updating the system firmware via Compact Flash card, please mind not to copy both engine and system firmware data at the same time to one CF card. Please perform firmware upgrades separately! (In worst case scenario, machine may not start up.) FS-920 Version Description Change of L4 default value 28 ->18 to adjust default left margin. (New value: L1 = 01, L2 = 13, L3 = 00, L4 = 18) Processing lock may occur when printing specific data. (Corrected) (Modification for raster process of True Type Font.) Special characters (logo, etc) may not be printed correctly. (Corrected) (Modification for calculation of width of the character.) Processing lock may occur when printing specific data from paper cassette in short edge direction. (Corrected: modification for calculation of line drawing.) F030 may occur when printing specific data from MAC OS 10.3. (Corrected) (Modification of print process in case the original contains mask/image data.) F030 may occur when printing an image file which is created by PhotoShop and printing it from QuarkXpress on Mac. (Corrected) (Modification of offset control.) Note: When updating the system firmware via Compact Flash card, please mind not to copy both engine and system firmware data at the same time to one CF card. Please perform firmware upgrades separately! (In worst case scenario, machine may not start up.) Firmware Details Version Checksum Label name System 2FV_3000.002.002 FB16 S2FV_3000002002 System 2FW_3000.002.003 DC68 S2FW_3000002003 Affected Machine Serial Numbers: FS-820: XLF5218756 and later FS-920 : XLG5113536 and later 2FV_3000.002.002 2FW_3000.002.003 U-No --- --- Rom type 4MB 4MB 1 / 1
Page 1 of 3

Compatible Models: Kyocera-FS-720-820-920.
– Kyocera-FS-720-820-920 Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-FS-720-820-920 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-FS-720-820-920 Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-FS-720-820-920 Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-FS-720-820-920 Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-FS-720-820-920.
1.5 How to update firmware Kyocera-FS-720-820-920.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-FS-720-820-920: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-FS-720-820-920.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-FS-720-820-920 Service-Bulletin covers following topics:

– Precautions Kyocera-FS-720-820-920.
– Product Specification Kyocera-FS-720-820-920.
– System Overview Kyocera-FS-720-820-920.
– S/W Structure and Descriptions Kyocera-FS-720-820-920.
– Disassembly and Reassembly Kyocera-FS-720-820-920.
– Alignment and Adjustments Kyocera-FS-720-820-920.
– Troubleshooting Kyocera-FS-720-820-920.
– Exploded Views & Parts List Kyocera-FS-720-820-920.

Free Download Kyocera-FS-720-820-920 Service-Bulletin

Kyocera-FS-720-820-920 Service-Bulletin

Leave a Reply