Service Bulletin Page / C30 / SB 2MW-00 KDIS Service Department, KYOCERA Document Solutions Europe B.V. SB Number: SB 2MW-001 LSU has been changed (Assembly process/Electrical noise resistance) FS-6525MFP/6530MFP Creation Date: 14/06/2012 Subject: Model: Classification Field measure When replacing the LSU, use the latest type. If the latest type of the LSU is installed in machines with the ferrite core and conductive clamp, do not remove these parts. Entire stock rework In-field modification at next visit No modification necessary In-field modification by case X No. Old Parts No. New Parts No. Description Q’TY Interchange - ability New Old X Old New O 302K39307 2K39307 302K393072 2K393072 LK-475 Parts To improve the assembly process and to increase the resistance against electrical noise, the LSU has been changed as follows : 1. The APC PWB has been changed. 2. Due to the above mentioned change, the ferrite core (A) and conductive clamp (B) are no longer necessary and have been discontinued. 3. Wire (C and D) have been changed. Contents of changes Old condition New condition LSU Discontinued conductive clamp (B) Discontinued ferrite core (A) Old type of the wire (D) Old type of the wire (C) APC PWB APC PWB New type of the wire (C) New type of the wire (D)
Page 1 of 20

Compatible Models: Kyocera-FS-6525-6530MFP.
– Kyocera-FS-6525-6530MFP Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-FS-6525-6530MFP Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-FS-6525-6530MFP Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-FS-6525-6530MFP Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-FS-6525-6530MFP Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-FS-6525-6530MFP.
1.5 How to update firmware Kyocera-FS-6525-6530MFP.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-FS-6525-6530MFP: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-FS-6525-6530MFP.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-FS-6525-6530MFP Service-Bulletin covers following topics:

– Precautions Kyocera-FS-6525-6530MFP.
– Product Specification Kyocera-FS-6525-6530MFP.
– System Overview Kyocera-FS-6525-6530MFP.
– S/W Structure and Descriptions Kyocera-FS-6525-6530MFP.
– Disassembly and Reassembly Kyocera-FS-6525-6530MFP.
– Alignment and Adjustments Kyocera-FS-6525-6530MFP.
– Troubleshooting Kyocera-FS-6525-6530MFP.
– Exploded Views & Parts List Kyocera-FS-6525-6530MFP.

Free Download Kyocera-FS-6525-6530MFP Service-Bulletin

Kyocera-FS-6525-6530MFP Service-Bulletin

Leave a Reply