KMIS Service Department, Kyocera Mita Europe B202-B203 / SB 2LX-003 Service Bulletin Page of 2 SB Number: SB 2LX-003 Creation Date: 26/07/2011 Subject: Firmware upgrade (FS-3040MFP/3140MFP Engine v004.001 and FS-3540MFP/3640MFP Engine v002.001/Scanner v002.001) FS-3040MFP/3140MFP/3540MFP/3640MFP Model: Type ENGINE MAIN MAIN SCANNER FAX BOOT/APL 2H9_5500.006.001 Program No. 2LW_1000.004.001 2LW_2F00008.003 2LX_2F00.008.003 2LW_1200.001.013 Check SUM Version 6EAA ---- ---- ---- ---- Status Date 10/06/2011 ---------- ---------- ---------- ---------- Applicable model(s) FS-3040MFP/3140MFP FS-3040MFP FS-3140MFP FS-3040MFP/3140MFP FS-3140MFP 004.001 008.003 008.003 001.013 006.001 Firmware for the FS-3040MFP/3140MFP Item Grey background on the print-out. Contents Phenomenon When the toner level is low, the message “Replace toner” or “Low toner” appears. After refilling the toner, grey background may appear on the print-out. 1 Solution The amount of refilled toner has been changed. Please note that the message “Replace toner” has been discontinued. Phenomenon Paper jam 9000 (Non feed jam) may occur. 2 Paper jam 9000 (FS-3540MFP/ 3640MFP only) Cause The timing switch may be delayed, in case original conveying is delayed due to slipping. Solution Therefore the retrial time for the timing switch has been changed as follows: Old condition: 334msec New condition: 484msec Type ENGINE MAIN MAIN SCANNER FAX BOOT/APL 2KX_5500.005.003 Program No. 2MC_1000.002.001 2MC_2F00.001.041 2MD_2F00.001.041 2MC_1200.002.001 Check SUM Version F709 ---- ---- FBB1 ---- Status Date 10/06/2011 ---------- ---------- 25/05/2011 ---------- Applicable model(s) FS-3540MFP/3640MFP FS-3540MFP FS-3640MFP FS-3540MFP/3640MFP FS-3640MFP 002.001 001.041 001.041 002.001 005.003 Firmware for the FS-3540/3640MFP
Page 1 of 3

Compatible Models: Kyocera-FS-3540-3640MFP.
– Kyocera-FS-3540-3640MFP Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-FS-3540-3640MFP Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-FS-3540-3640MFP Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-FS-3540-3640MFP Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-FS-3540-3640MFP Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-FS-3540-3640MFP.
1.5 How to update firmware Kyocera-FS-3540-3640MFP.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-FS-3540-3640MFP: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-FS-3540-3640MFP.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-FS-3540-3640MFP Service-Bulletin covers following topics:

– Precautions Kyocera-FS-3540-3640MFP.
– Product Specification Kyocera-FS-3540-3640MFP.
– System Overview Kyocera-FS-3540-3640MFP.
– S/W Structure and Descriptions Kyocera-FS-3540-3640MFP.
– Disassembly and Reassembly Kyocera-FS-3540-3640MFP.
– Alignment and Adjustments Kyocera-FS-3540-3640MFP.
– Troubleshooting Kyocera-FS-3540-3640MFP.
– Exploded Views & Parts List Kyocera-FS-3540-3640MFP.

Free Download Kyocera-FS-3540-3640MFP Service-Bulletin

Kyocera-FS-3540-3640MFP Service-Bulletin

Leave a Reply