Service-Bulletin-Kyocera-FS-1120-1320-1370

KMIS Service Department, Kyocera Mita Europe A157 / SB 2L0-001 Service Bulletin Page 1 of 1 SB Number: SB 2L0-001 Creation Date: 25/08/2010 Subject: Model: Failure to use the USB memory properly FS-1370DN Item Failure to recognize USB memory due to the static electricity. Contents Phenomenon The USB memory may not to be recognized or the stored files can not be printed, due to the static electricity. 1 Details 1. The “>” mark does not appear, after selecting the “USB Memory” with the Menu key. 2. The “>” mark does appear, the file can not be selected when moving with “>” and when pressing “OK’ twice at “Print file”. 3. The arrow mark does appear and the file can be selected, the file can not be printed, while “Processing” is displayed followed by the “Ready” message. Solution 1. Please turn the machine OFF and ON. 2. Remove the USB memory from the USB host, and reconnect it. 3. Remove the USB memory from the USB host, and reconnect it. Phenomenon The USB memory may not be recognized and the message “the USB memory is disconnected” may be displayed. 2 Failure to recognize USB memory while power is supplied to the machine. Cause When the USB memory is connected to the USB host, the 5V power is supplied to the USB memory. After the machine recognizes the USB memory, it waits for a certain amount of time before receiving the signal to connect the USB memory. If the signal is not received in time, the USB memory can not be recognized.
Page 1 of 3

Compatible Models: Kyocera-FS-1120-1320-1370.
– Kyocera-FS-1120-1320-1370 Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-FS-1120-1320-1370 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-FS-1120-1320-1370 Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-FS-1120-1320-1370 Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-FS-1120-1320-1370 Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-FS-1120-1320-1370.
1.5 How to update firmware Kyocera-FS-1120-1320-1370.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-FS-1120-1320-1370: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-FS-1120-1320-1370.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-FS-1120-1320-1370 Service-Bulletin covers following topics:

– Precautions Kyocera-FS-1120-1320-1370.
– Product Specification Kyocera-FS-1120-1320-1370.
– System Overview Kyocera-FS-1120-1320-1370.
– S/W Structure and Descriptions Kyocera-FS-1120-1320-1370.
– Disassembly and Reassembly Kyocera-FS-1120-1320-1370.
– Alignment and Adjustments Kyocera-FS-1120-1320-1370.
– Troubleshooting Kyocera-FS-1120-1320-1370.
– Exploded Views & Parts List Kyocera-FS-1120-1320-1370.

Free Download Kyocera-FS-1120-1320-1370 Service-Bulletin

Kyocera-FS-1120-1320-1370 Service-Bulletin

Leave a Reply