SB Number: SB 2G4-003 Creation Date: 28/08/2007 Subject: Model: Firmware upgrade, Ver. V1.68B/V.2.12F (system) FS-1016MFP/1116MFP Service Bulletin KMIS Service Team, Kyocera Mita Europe 8204 / SB 2G4-003 The system firmware is upgraded to correct the following phenomena: FS-1016MFP The CCD image process timing has been changed to eliminate tiny white dots which may appear when copying in Photo or Mixed mode. Type Program No. Check SUM VER. SYSTEM 3in1_V168B_ Char .zip - V1.68B ======================================================================================== FS-1116MFP The CCD image process timing has been changed to eliminate tiny white dots which may appear when copying in Photo or Mixed mode. A total page defective display failure (at fax footer) has been corrected. The Fax board has been changed to comply with Argentinan telephone line standard. An on/off switch function for Ringer sound has been added. Type Program No. Check SUM VER. SYSTEM - V2.12F Serial number information: All machines produced in August 2007 and onwards will have this firmware installed.
Page 1 of 3

Compatible Models: Kyocera-FS-1116MFP.
– Kyocera-FS-1116MFP Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-FS-1116MFP Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-FS-1116MFP Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-FS-1116MFP Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-FS-1116MFP Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-FS-1116MFP.
1.5 How to update firmware Kyocera-FS-1116MFP.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-FS-1116MFP: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-FS-1116MFP.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-FS-1116MFP Service-Bulletin covers following topics:

– Precautions Kyocera-FS-1116MFP.
– Product Specification Kyocera-FS-1116MFP.
– System Overview Kyocera-FS-1116MFP.
– S/W Structure and Descriptions Kyocera-FS-1116MFP.
– Disassembly and Reassembly Kyocera-FS-1116MFP.
– Alignment and Adjustments Kyocera-FS-1116MFP.
– Troubleshooting Kyocera-FS-1116MFP.
– Exploded Views & Parts List Kyocera-FS-1116MFP.

Free Download Kyocera-FS-1116MFP Service-Bulletin

Kyocera-FS-1116MFP Service-Bulletin

Leave a Reply