Service-Bulletin-Kyocera-FS-1018MFP

KMIS Service Team, Kyocera Mita Europe KMC / SB 2DD-001 Service Bulletin 1 / 1 SB Number: SB 2DD-001 Subject: How to add an optional language in FS-1018MFP? Model: FS-1018MFP Creation Date: 17/08/2004 The FS-1018MFP features the addition of an extra optional language. This Service Bulletin informs you of the procedure of downloading an additional optional language to the FS-1018MFP. The FS-1018MFP supports following 7 languages as a standard. It is possible to add 1 extra option language. - English - French - Spanish - German - Italian - Portuguese - Dutch IMPORTANT NOTE Please mind that the addition of an optional language is supported as of firmware level 2DD_2000.002.006 and later. Please upgrade to this version or later before downloading an optional language to the FS-1018MFP! PROCEDURE First format the CF card in a PC in advance. You will need to add 2 files to the CF card (instead of the usual 1); namely the "VERDEF" file and the actual option message data "2CC_xxxxxxxxxxxxxx.opm". Copy the data to the root directory of the CF card by using a CF WRITER. For example (in case of Hungarian optional language): 2DD_8HU001001.opm VERDEF Modify the "VERDEF" file by using a text editor to conform the file name. Open "VERDEF" with editor. The name of the option language file should match the name mentioned in the "VERDEF" file. If not, then please change accordingly. For example (in case of Hungarian): VER 0.9 THIS VERDEF OPTMSG ./2DD_81 HU 001001.opm P B Insert the CF card, with the above 2 files on it, into the FS-1018MFP CF slot. (For more details, please refer to Service Manual, Chapter 1-7-1) Insert power plug again and turn power on. Option language file will be downloaded to machine. While downloading, the message "Downloading" will be visible. When downloading is finished, the message "Completed" appears. Turn power switch off and remove the CF card. After turning power ON again, the optional message can be selected from ' Common Settings ' button => ' Language '. NOTE: Machine firmware version 2DD_2000.002.006 (or later) and the available optional language files can be downloaded from our Distributors reserved website accessible via www.kmissupport.com n o p q r s ) )
Page 1 of 6

Compatible Models: Kyocera-FS-1018MFP.
– Kyocera-FS-1018MFP Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-FS-1018MFP Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-FS-1018MFP Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-FS-1018MFP Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-FS-1018MFP Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-FS-1018MFP.
1.5 How to update firmware Kyocera-FS-1018MFP.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-FS-1018MFP: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-FS-1018MFP.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-FS-1018MFP Service-Bulletin covers following topics:

– Precautions Kyocera-FS-1018MFP.
– Product Specification Kyocera-FS-1018MFP.
– System Overview Kyocera-FS-1018MFP.
– S/W Structure and Descriptions Kyocera-FS-1018MFP.
– Disassembly and Reassembly Kyocera-FS-1018MFP.
– Alignment and Adjustments Kyocera-FS-1018MFP.
– Troubleshooting Kyocera-FS-1018MFP.
– Exploded Views & Parts List Kyocera-FS-1018MFP.

Free Download Kyocera-FS-1018MFP Service-Bulletin

Kyocera-FS-1018MFP Service-Bulletin

Leave a Reply