KMIS Service Team, Kyocera Mita Europe 6451 / SB 2BX-001 Service Bulletin SB Number: SB 2BX-001 Creation Date: 16/12/2003 Subject: Model: System firmware upgrade FS-1010 / 1050 Please be informed that the system firmware for the FS-1010 / 1050 has been changed as follows. CONTENTS OF CHANGES 9 New parameter FRPO o2=9 has been added to enable ‘paper empty’ control. A similar PE signal and data receiving control has been added as in the previous model FS-1000. 9 When printing a PCL file after downloading several PCL fonts, font selection might not be correct and the font lastly downloaded is selected. In compliance with the change of firmware, the Mask ROM type and DIMM board have been changed. As a result, also the part code has changed as follows. Field Measure: If phenomena arises please change the system DIMM. Checksum Label name Version U-no. Rom type System 80.06 0900 S93K8006 YS01 4MB-DIMM Part No. OLD Part No. NEW Description OLD P.W.B. ASSY KP-854 Description NEW P.W.B. ASSY KP-893 Q’ty old-new Interchange ability Remarks 5AAPRMEG2011HQ 2BX01200 1 1 O O PWBA/D Affected Machine Serial Numbers: FS-1010: from XAL3X89428 to XAL3X91168 / XAL3Y93199 and later FS-1050: from next production. 1 / 1
Page 1 of 5

Compatible Models: Kyocera-FS-1010.
– Kyocera-FS-1010 Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-FS-1010 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-FS-1010 Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-FS-1010 Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-FS-1010 Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-FS-1010.
1.5 How to update firmware Kyocera-FS-1010.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-FS-1010: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-FS-1010.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-FS-1010 Service-Bulletin covers following topics:

– Precautions Kyocera-FS-1010.
– Product Specification Kyocera-FS-1010.
– System Overview Kyocera-FS-1010.
– S/W Structure and Descriptions Kyocera-FS-1010.
– Disassembly and Reassembly Kyocera-FS-1010.
– Alignment and Adjustments Kyocera-FS-1010.
– Troubleshooting Kyocera-FS-1010.
– Exploded Views & Parts List Kyocera-FS-1010.

Free Download Kyocera-FS-1010 Service-Bulletin

Kyocera-FS-1010 Service-Bulletin

Leave a Reply