Service-Bulletin-Kyocera-FaxSystemN

Service Bulletin KMIS Service Department, Kyocera Mita Europe 8502 / SB 3JF-003 Page of SB Number: SB 3JF-003 Creation Date: 28/08/2008 Subject: Model: Continuous sound from the fax speaker Fax system (P/L/N) Classification Field measure When the above mentioned phenomenon occurs replace old with new parts. Entire stock rework In-field modification at next visit No modification necessary In-field modification by case X Parts No. Old Parts No. New Parts No. Description Q’TY Interchange - ability New Old 1 X SP Old 1 New O Fax system (L) 1 303LH94010 3LH94010 303JF01110 3JF01110 303KK01030 3KK01030 303LH94011 3LH94011 303JF01111 3JF01111 303KK01031 3KK01031 PARTS,PWB MAIN FAX ASSY SP MAIN FAX ASS’Y(A) WITH SOFTWARE MAIN FAX ASS’Y(A) WITH SOFTWARE O Fax system (P) 2 1 1 X O O Fax system (N) 3 1 1 X X O Affected serial numbers Type Not available yet. Serial number Phenomenon The fax speaker may generate sound continuously after turning on the machine. Cause Depending on fax board coil (L102) oscillation may occur, which affects the fax speaker. Solution 1. The coil (L102) has been changed from 22 μH ± 30% to 22 μH ± 15% to increase tolerance against inductance. 2. The resistance of fuse (F101) has been changed from 1.5A to 3.0A. Affected models: FAX System (P) : KM-2540/3040 FAX System (L) : KM-1650/2050/2550 FAX System (N) : KM-C2520/3225/3232/2525E/3232E/C4035E
Page 1 of 4

Compatible Models: Kyocera-FaxSystemN.
– Kyocera-FaxSystemN Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-FaxSystemN Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-FaxSystemN Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-FaxSystemN Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-FaxSystemN Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-FaxSystemN.
1.5 How to update firmware Kyocera-FaxSystemN.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-FaxSystemN: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-FaxSystemN.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-FaxSystemN Service-Bulletin covers following topics:

– Precautions Kyocera-FaxSystemN.
– Product Specification Kyocera-FaxSystemN.
– System Overview Kyocera-FaxSystemN.
– S/W Structure and Descriptions Kyocera-FaxSystemN.
– Disassembly and Reassembly Kyocera-FaxSystemN.
– Alignment and Adjustments Kyocera-FaxSystemN.
– Troubleshooting Kyocera-FaxSystemN.
– Exploded Views & Parts List Kyocera-FaxSystemN.

Free Download Kyocera-FaxSystemN Service-Bulletin

Kyocera-FaxSystemN Service-Bulletin

Leave a Reply