Service-Bulletin-Kyocera-FaxSystemL

Service Bulletin KMIS Service Department, Kyocera Mita Europe 8379 / SB 3JF-002 Page of SB Number: SB 3JF-002 Creation Date: 12/06/2008 Subject: Machine does not switch to fax mode, because “function key change switch” responds insufficiently. FAX System (L) Model: Classification Field measure When the above mentioned phenomenon occurs, please replace old type cover plate (plate fax E) with new type. Entire stock rework In-field modification at next visit No modification necessary In-field modification by case X Parts No. Old Parts No. New Parts No. Description Q’TY Interchange - ability New Old 1 X SP Old 1 New O 1 303JF25021 3JF25021 303JF25022 3JF25022 COVER PLATE (PLATE FAX E) O Affected serial numbers Type Fax system L Serial number From the production of February 2008 Phenomenon Machine does not switch to fax mode, when opening the cover plate (plate fax E) to the left. Cause This is because the cover plate (plate fax E) does not make sufficient contact with the function key change switch. Solution The notch on the cover plate (plate fax E) has been made thicker, to improve the contact with the function key switch. See below for further details. Operation panel with the cover plate to the right Operation panel with the cover plate to the left Close up illustration with the cover plate to the right Affected models: KM-1650/2050/2550 Function key change switch Notch
Page 1 of 2

Compatible Models: Kyocera-FaxSystemL.
– Kyocera-FaxSystemL Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-FaxSystemL Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-FaxSystemL Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-FaxSystemL Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-FaxSystemL Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-FaxSystemL.
1.5 How to update firmware Kyocera-FaxSystemL.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-FaxSystemL: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-FaxSystemL.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-FaxSystemL Service-Bulletin covers following topics:

– Precautions Kyocera-FaxSystemL.
– Product Specification Kyocera-FaxSystemL.
– System Overview Kyocera-FaxSystemL.
– S/W Structure and Descriptions Kyocera-FaxSystemL.
– Disassembly and Reassembly Kyocera-FaxSystemL.
– Alignment and Adjustments Kyocera-FaxSystemL.
– Troubleshooting Kyocera-FaxSystemL.
– Exploded Views & Parts List Kyocera-FaxSystemL.

Free Download Kyocera-FaxSystemL Service-Bulletin

Kyocera-FaxSystemL Service-Bulletin

Leave a Reply