Service-Bulletin-Kyocera-DF-720

SB Number: SB 3J3-001 Creation Date: 28/ 1 0/2006 Subject: Model: MEASURE: staple misalignment, changed parts DF-720, DF-78, DF-410, F-2205 Service Bulletin K M IS Service Team, Kyocera Mita Europe 7685 / SB 3J3-001 A film was added as a temporary measure against a staple misalignment problem in the DF-720. A permanent measure has been taken by changing the shape of the Cursor (No.1) by increasing its stablility. Due to this change, the new and old Cursor are not compatible with each other. Please keep it in mind when replacing the parts. Contents of change 1) Increased thickness on the sticking surface for the film (No.2) on Cursor (No.1) and the material indication has been changed (These changes only apply to DF-720, DF-78) Old material indication >ABS< (New) >ABS< P2H-AT 2) Due to the above change, Film (No.2) has been disused (This applies only to DF-720); 3) Due to the change mentioned in pt.1, the shape of <Front/rear cursor (No.3, 4) have been changed (No.3 applies only to DF-720 and DF-78). (*please refer to the drawing on the following page to see which changes have been made.) No. Old parts number New parts number Description Q’ty Interc abi Old hange lity New Remarks Old New 1 303B507081 3B507081 303J336100 3J336100 303B507082 3B507082 CURSOR,LEADING REGISTRATION 1 1 X X *1 2 ------------ FILM CURSOR 1 - X - DF-720 3 3B507040 303B507041 3B507041 303BN07101 3BN07101 FRONT CURSOR,SIDE REGISTRATION REAR CURSOR,SIDE REGISTRATION 1 1 X O *1 4 3BN07100 1 1 X O *2 1. 2. Because F-2205 and DF-410 do not use No.1-3, it will be no problem to use either new or old Rear Cursor (No.4). DF-78, DF-720 DF-78, DF-720, F-2205, DF-410 Field measure: DF-720/DF-78: F-2205/DF-410: The old No.1 part should be used in combination with the old No.2-4. The new No.1 should be used together with the new No.3, 4. it will be no problem to use either new or old Rear Cursor (No.4) Affected machine serial numbers: DF-720, DF-78: F-2205, DF-410: From the production in August 2006 the machines will be assembled using the new parts. After using up the current stock these machines will be assembled using the new parts.
Page 1 of 5

Compatible Models: Kyocera-DF-720.
– Kyocera-DF-720 Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-DF-720 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-DF-720 Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-DF-720 Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-DF-720 Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-DF-720.
1.5 How to update firmware Kyocera-DF-720.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-DF-720: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-DF-720.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-DF-720 Service-Bulletin covers following topics:

– Precautions Kyocera-DF-720.
– Product Specification Kyocera-DF-720.
– System Overview Kyocera-DF-720.
– S/W Structure and Descriptions Kyocera-DF-720.
– Disassembly and Reassembly Kyocera-DF-720.
– Alignment and Adjustments Kyocera-DF-720.
– Troubleshooting Kyocera-DF-720.
– Exploded Views & Parts List Kyocera-DF-720.

Free Download Kyocera-DF-720 Service-Bulletin

Kyocera-DF-720 Service-Bulletin

Leave a Reply