SB Number: SB 3JY-001 Creation Date: 03/08/2006 Subject: Model: Remarks when replacing a SPACER FINISHER DF-710 Service Bulletin KIMS Service Team, Kyocera Mita Europe 7659 / SB 3JY-001 To improve the production process for the SPACER FINISHER, the new and old parts are no longer interchangeable. Contents of change When fixing the SPACER FINISHER, it should be fixed by PIN CONNECTER, instead of a SCREW and a WASHER. Due to the above change, the shape and measurements of the SPACER FINISHER is changed. No. Old parts number New part number Description Q’ty Interc abi Old hange lity New Old New 1 303JY02470 3JY02470 303JY02471 3JY02471 SPACER FINISHER 2 2 X O 2 5MBTPB3014TW++R B1A53140 302FB08462 2FB08462 PIN CONNECTOR 2 2 X X 3 C2604080 ------------ PLAIN WASHER M4-8 (BRASS,N:) 2 - X - Field Measure: When replacing the parts, please use the new part ‘PIN CONNECTOR’ only to fix the new SPACER FINISHER (Do not affix the old SPACER FINISHER). This change will take affect from: The production in August, 2006 SCREW WASHER 7.5 MM 4.9 MM PIN CONNECTOR OLD SITUATION NEW SITUATION
Page 1 of 11

Compatible Models: Kyocera-DF-710-MT710-BF710-PH5A-C-D.
– Kyocera-DF-710-MT710-BF710-PH5A-C-D Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-DF-710-MT710-BF710-PH5A-C-D Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-DF-710-MT710-BF710-PH5A-C-D Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-DF-710-MT710-BF710-PH5A-C-D Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-DF-710-MT710-BF710-PH5A-C-D Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-DF-710-MT710-BF710-PH5A-C-D.
1.5 How to update firmware Kyocera-DF-710-MT710-BF710-PH5A-C-D.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-DF-710-MT710-BF710-PH5A-C-D: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-DF-710-MT710-BF710-PH5A-C-D.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-DF-710-MT710-BF710-PH5A-C-D Service-Bulletin covers following topics:

– Precautions Kyocera-DF-710-MT710-BF710-PH5A-C-D.
– Product Specification Kyocera-DF-710-MT710-BF710-PH5A-C-D.
– System Overview Kyocera-DF-710-MT710-BF710-PH5A-C-D.
– S/W Structure and Descriptions Kyocera-DF-710-MT710-BF710-PH5A-C-D.
– Disassembly and Reassembly Kyocera-DF-710-MT710-BF710-PH5A-C-D.
– Alignment and Adjustments Kyocera-DF-710-MT710-BF710-PH5A-C-D.
– Troubleshooting Kyocera-DF-710-MT710-BF710-PH5A-C-D.
– Exploded Views & Parts List Kyocera-DF-710-MT710-BF710-PH5A-C-D.

Free Download Kyocera-DF-710-MT710-BF710-PH5A-C-D Service-Bulletin

Kyocera-DF-710-MT710-BF710-PH5A-C-D Service-Bulletin

Leave a Reply