Service-Bulletin-Kyocera-3MY-001

KMIS Service Department, Kyocera Mita Europe 9052 / SB 3MY-001 Service Bulletin Page 1 of 1 SB Number: SB 3MY-001 Creation Date: 19/11/2009 Subject: Firmware upgrade and parts changes (machine lock and Numonyx flash memory) Printing System (Z) Model: Classification Field measure When the above mentioned phenomena occur, please upgrade the firmware to the latest version. Entire stock rework In-field modification at next visit No modification necessary In-field modification by case X Parts No. Old Parts No. New Parts No. Description Q’TY Interchange - ability New Old 1 X SP Old 1 New O 1 303MY94012 3MY94012 ---------- 303MY94013 3MY94013 303MY94021 3MY94021 PARTS GDI PWB ASSY SP PARTS PWB DIMM ASSY WITH SOFTWARE SP O 2 - 1 - O O Firmware Type PRINTER PRINTER Program No. 2KK_3000.000.020dimm 2KK_3000.000.020USB Check SUM Version 934C ---- Remarks For writing to DIMM For PC/USB 2KK_3000.000.020 2KK_3000.000.020 Type Printing System (Z) Serial number Not available Serial numbers of affected machines Contents of changes Item Machine lock after sleep mode. Contents The machine may lock while the message “waiting” is displayed, due to a failure to process data that is received during sleep mode. The Numonyx flash memory which will be used in the future is now supported. 1 2 Added support for Numonyx flash memory. Affected models: TASKalfa180/220
Page 1 of 1

Compatible Models: Kyocera-3MY-001.
– Kyocera-3MY-001 Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-3MY-001 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-3MY-001 Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-3MY-001 Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-3MY-001 Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-3MY-001.
1.5 How to update firmware Kyocera-3MY-001.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-3MY-001: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-3MY-001.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-3MY-001 Service-Bulletin covers following topics:

– Precautions Kyocera-3MY-001.
– Product Specification Kyocera-3MY-001.
– System Overview Kyocera-3MY-001.
– S/W Structure and Descriptions Kyocera-3MY-001.
– Disassembly and Reassembly Kyocera-3MY-001.
– Alignment and Adjustments Kyocera-3MY-001.
– Troubleshooting Kyocera-3MY-001.
– Exploded Views & Parts List Kyocera-3MY-001.

Free Download Kyocera-3MY-001 Service-Bulletin

Kyocera-3MY-001 Service-Bulletin

Leave a Reply