KMIS Service Department, Kyocera Mita Europe 8775 / SB 2FB-030 Service Bulletin Page of SB Number: SB 2FB-030 Creation Date: 04/08/2009 Subject: Model: Vertical black line, drum damage caused by the separation claw KM-6030/8030, TASKalfa620/820 Classification Field measure When the above mentioned phenomena occur, please replace the claw separation holder with the latest type. (Parts separation claw ass’y 302FB93301). Entire stock rework In-field modification at next visit No modification necessary In-field modification by case X Parts No. Old Parts No. New Parts No. Description Q’TY Interchange - ability New Old 1 X SP Old 1 New O 1 302KP93160 2KP93160 302FB93300 2FB93300 302KP93161 2KP93161 302FB93301 2FB93301 PARTS CLEANING ASSY (TASKalfa620/820 only) +PARTS SEPARATION CLAW ASS’Y O 2 1 1 X O O Affected serial numbers Type KM-6030/8030, TASKalfa620/820 Serial number March 2009 production Phenomenon The following phenomena may occur: 1. Paper jam at cleaning unit. 2. Transfer separation failure causing the paper to push the separation claw against the drum. Solution The holder of the separation claw has been changed, to ensure that the claw can not be pushed against the drum.
Page 1 of 9

Compatible Models: Kyocera-2FB.
– Kyocera-2FB Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-2FB Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-2FB Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-2FB Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-2FB Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-2FB.
1.5 How to update firmware Kyocera-2FB.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-2FB: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-2FB.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-2FB Service-Bulletin covers following topics:

– Precautions Kyocera-2FB.
– Product Specification Kyocera-2FB.
– System Overview Kyocera-2FB.
– S/W Structure and Descriptions Kyocera-2FB.
– Disassembly and Reassembly Kyocera-2FB.
– Alignment and Adjustments Kyocera-2FB.
– Troubleshooting Kyocera-2FB.
– Exploded Views & Parts List Kyocera-2FB.

Free Download Kyocera-2FB Service-Bulletin

Kyocera-2FB Service-Bulletin

Leave a Reply