Service-Bulletin-Kyocera-180-181-220-221

KMIS Service Department, Kyocera Mita Europe 8973 / SB 2KH-002 Service Bulletin Page of SB Number: SB 2KH-002 Creation Date: 01/10/2009 Subject: Model: Firmware upgrade (Paper jam 05 and abnormal image) TASKalfa181/221 Classification Field measure When the above mentioned phenomena occur, please upgrade the firmware to the latest version. Entire stock rework In-field modification at next visit No modification necessary In-field modification by case X Firmware Type MAIN (IPU) Program No. 2KH_2000. 001.030 Check SUM ---- ---- ---- ---- Version 001.030 ENGINE 2KK_1000. 002.002 002.002 LANGUAGE E 2KH_81XE. 001.003 001.003 PRINTER FS 2KH_3F00. 001.022 001.022 Affected serial numbers Type TASKalfa181/221 Serial number August 2009 production Contents of changes Item Contents Phenomenon Paper jam 05 may occur under the following conditions: 1 Paper jam 05 during memory full indication. The message “memory full” is displayed when pressing the start key after changing the function to copy when the original is placed in the DP while the memory is almost full. When changing the function to scan and when returning to the copy function, “memory full” is displayed with the option to click “continue” or “cancel” Paper jam 05 may occur when pressing “continue”. Solution The function (copy, scan etc.) can no longer be changed while “memory full” is displayed When scanning an original to PC, after switching the function to “send” during paper empty indication, an abnormal image may appear on the print-out when resuming the copy job after filling the paper cassette. 2 Abnormal image after filling the paper cassette due to paper empty indication.
Page 1 of 20

Compatible Models: Kyocera-180-181-220-221.
– Kyocera-180-181-220-221 Service-Bulletin: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-180-181-220-221 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-180-181-220-221 Service-Bulletin:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-180-181-220-221 Service-Bulletin.
1.3 Diagnostic all errors are generated by Kyocera-180-181-220-221 Service-Bulletin:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-180-181-220-221.
1.5 How to update firmware Kyocera-180-181-220-221.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-180-181-220-221: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-180-181-220-221.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-180-181-220-221 Service-Bulletin covers following topics:

– Precautions Kyocera-180-181-220-221.
– Product Specification Kyocera-180-181-220-221.
– System Overview Kyocera-180-181-220-221.
– S/W Structure and Descriptions Kyocera-180-181-220-221.
– Disassembly and Reassembly Kyocera-180-181-220-221.
– Alignment and Adjustments Kyocera-180-181-220-221.
– Troubleshooting Kyocera-180-181-220-221.
– Exploded Views & Parts List Kyocera-180-181-220-221.

Free Download Kyocera-180-181-220-221 Service-Bulletin

Kyocera-180-181-220-221 Service-Bulletin

Leave a Reply