Service-Bulletin-Canon-iR58xx-68xx

(1/5) Service Bulletin Issued by Canon Europa N.V. Copier Color Hardware Revised: Addition of affected machines. Location: Machine Rear Plate 1 Subject: Measures against E001/E003/E006 Detail: Previously, a communication has been released to indicate an increased amount of grease as a remedy. Additional changes will be introduced to the Fixing Drawer Mount, Compression Spring and Stepped Screw aimed at further improvement in performance. <Symptom> E001, E003 or E006 is displayed. <Cause> The Washer [1] of the Fixing Drawer Connector mounting on the machine Rear Plate slides on the Stepped Screw surface [2] when the Fixing Assembly is set to the machine. However, a force of the Compression Spring [3] becomes inadequate because frictional resistance between the Washer and the Stepped Screw surface is large, leading to poor contact of the Drawer Connector on the Fixing Feeder Unit. Model: iR 5800C iR 5800CN iR 5870C iR 5870Ci iR 6800C iR 6800CN iR 6870C iR 6870Ci Ref No.: iR6800C-019 Rev. 4 (F2-T01-0M3-10045-05) Date: March, 2006
Page 1 of 37

-Service-Bulletin-Canon-iR58xx-68xx : frame unit, drive, laser unit, paper feeder, mp unit, dx, paper tray, fuser unit, paper eject , covers&labels, document scanner adf panel pcb accessories , printed material, packing materials , periodical maintenance part…
-Service-Bulletin-Canon-iR58xx-68xx: Repair guide, fix fuser/scaner unit, paper jammed inside printer, toner cartrdige error, sensor error…

Leave a Reply