Repair-Guide-Samsung-SCX-5530FN

System Overview Samsung Electronics Service Manual 3-1 3 3 3.1.1 SUMMARY 3. System Overview 3.1 System Construction SCX-5530FN is roughly made up Main Control part, Operation Panel part, Scanner part, Line Interface part and Power part. Each Part is separated Module which focus on common and standard design of different kind products. Main control part adopting Fax & LBP Printer exclusive Controller is composed of 1 CPU and 1 Board. Scanner part is composed of ADF and Platen and is connected with Main by Harness. Line Interface Unit part is designed to apply TBR21 standard (Domestic, Europe, etc.) 1) CPU : ARM920T , which is exclusive controller to execute Printer & FAX Function and to execute operation block by flash memory within system program, and to control whole system. Main function block Completely Integrated System for Embedded Applications PVC - Dual / Single Beam, - LVDS Pad (VDO, HSYNC), - Support A3 1200dpi, multi-pass color. HPVC - Dual / Single Beam, - LVDS Pad (VDO, HSYNC), - Support A4 600dpi, multi-pass color. DMA - 6 Channels (if not use CIP4e, 4ch is available for external DMA. if CIP4E used (a4 DMA channel use), 2ch available for external DMA) Operation Frequency : CPU Core -> over 300MHz, System Bus -> 100MHz Operation Voltage : Core Voltage -> 1.2V, I/O Pad Voltage -> 3.3V, RTC Voltage -> 3V 2) Flash Memory : Record System Program, and download System Program by PC INTERFACE. FAX for Journal List, and Memory for One Touch Dial, Speed Dial List. - Size : 32M Byte (NAND Flash) - Random Access Time: 10us (Max) - Serial Page Access Time: 50ns (Min) 3) SDRAM : is used as Swath Buffer in Printing, Scan Buffer in Scanning, ECM Buffer in FAX receiving, and System Working Memory Area - Size : 64Mbyte(Basic) , 96Mbyte(Duplex) MB : System Working Memory Area and Scan Buffer MB : FAX Memory Receive Area MB : Printing System Working Memory Area - Max Frequency : 166MHz - Store Fax Receive Memory Data by using Battery
Page 1 of 188

Compatible Models: Samsung-SCX-5530FN.
– Samsung-SCX-5530FN Repair-Guide: is a handbook published by Samsung manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Samsung-SCX-5530FN Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Samsung-SCX-5530FN Repair-Guide:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Samsung-SCX-5530FN Repair-Guide.
1.3 Diagnostic all errors are generated by Samsung-SCX-5530FN Repair-Guide:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Samsung-SCX-5530FN.
1.5 How to update firmware Samsung-SCX-5530FN.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Samsung-SCX-5530FN: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Samsung-SCX-5530FN.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Samsung-SCX-5530FN Repair-Guide covers following topics:

– Precautions Samsung-SCX-5530FN.
– Product Specification Samsung-SCX-5530FN.
– System Overview Samsung-SCX-5530FN.
– S/W Structure and Descriptions Samsung-SCX-5530FN.
– Disassembly and Reassembly Samsung-SCX-5530FN.
– Alignment and Adjustments Samsung-SCX-5530FN.
– Troubleshooting Samsung-SCX-5530FN.
– Exploded Views & Parts List Samsung-SCX-5530FN.

Free Download Samsung-SCX-5530FN Repair-Guide

Samsung-SCX-5530FN Repair-Guide

Leave a Reply