T echnical B ulletin PAGE: 1/21 Reissued: 2-Jun-05 Model: PRIPORT PINKGOLD/PGB4/PGP Subject: New Model PGA3P/PGB4P information (China only) Date: 2-Dec-03 Prepared by: M. Kanomata, Priport Service Planning Section Part information Electrical Transmit/receive No: R-C238 - 012a Classification: Troubleshooting Mechanical Paper path Other (New model information) Action required Service manual revision Retrofit information Model Name: PINKGOLD: PGB4 (China only): PGA3P (China only): PGB4P (China only): RTB Reissue The areas in bold/italics were changed. Changes: 1. The Paper Feed Side Pad (Paper Plate Thin Pad) was deleted from the accessory list (section 1.2.1). Note: This part was deleted from the beginning of mass-production (PGA3-P, PGB4- P only). 2. Some section numbers were changed to match the PINKGOLD Service Manual. - - - - - - - - This bulletin contains all service-related information unique to Model PGA3P (C246) / PGB4P (C254), which is scheduled for official release in China in February 2004. Please add this information to your PinkGold Series Service Manuals and also refer to RTB #R-C238-004 for PGB4 information. Note: Please also see MB #M-C238-025 for a list of the components unique to the PGA3P/PGB4P. Ricoh JP3000/JP3800, Gestetner 5430/5428C, RexRotary 1330, nashuatec CP430, Savin 3260DNP, Standard SD370, Lanier LDD030 Ricoh JP2800, Gestetner 5425C Ricoh JP3810P, Gestetner 5438P Ricoh JP2810P, Gestetner 5435P
Page 1 of 21

Compatible Models: Ricoh-JP-3810.
– Ricoh-JP-3810 Repair-Guide: is a handbook published by Ricoh manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Ricoh-JP-3810 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Ricoh-JP-3810 Repair-Guide:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Ricoh-JP-3810 Repair-Guide.
1.3 Diagnostic all errors are generated by Ricoh-JP-3810 Repair-Guide:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Ricoh-JP-3810.
1.5 How to update firmware Ricoh-JP-3810.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Ricoh-JP-3810: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Ricoh-JP-3810.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Ricoh-JP-3810 Repair-Guide covers following topics:

– Precautions Ricoh-JP-3810.
– Product Specification Ricoh-JP-3810.
– System Overview Ricoh-JP-3810.
– S/W Structure and Descriptions Ricoh-JP-3810.
– Disassembly and Reassembly Ricoh-JP-3810.
– Alignment and Adjustments Ricoh-JP-3810.
– Troubleshooting Ricoh-JP-3810.
– Exploded Views & Parts List Ricoh-JP-3810.

Free Download Ricoh-JP-3810 Repair-Guide

Ricoh-JP-3810 Repair-Guide

Leave a Reply