Installation-Guide-Kyocera-SCanSystemH

2008.11 303M256710 A 1 3 3 2 3 3 4 5 5 5 6 5 スキャンシステム設置手順書 複写速度が 62/82 枚/分(A4 ヨコ)の機械に取り付ける場合 同梱品 A スキャナ基板 ....................... 1 スキャンシステムを取り付けるときは、必ず複 写機本体のメインスイッチを OFF にし、電源プ ラグを抜いてから作業すること。 1. ビス (1) 2 本を外し、カバー(2) を取り外す。 2. ビス (3) 9 本を外し、後上カバー(4) を取り 外す。 3. ビス (5) 8 本を外し、フタシーケンス右 (6) を取り外す。 4. スキャナ基板 (A) の CN5 コネクタをメイン 基板の YC3 コネクタの奥まで差し込む。 5. ビス (1) 2 本でスキャナ基板 (A) をコント ローラボックスカバーに固定する。 6. フタシーケンス右 (6) および後上カバー(4) を元通り取り付ける。 INSTALLATION GUIDE for Scan System For installation on copiers with a copy speed of 62/82 copies per minute (A4 lateral) Supplied parts A Scanner board..........................................1 Turn the copier’s main switch to OFF and unplug the copier from the power supply before starting this procedure. 1. Remove the two screws (1) to remove the cover (2). 2. Remove the nine screws (3) to remove the back upper cover (4). 3. Remove the eight screws (5) to remove the right sequence cover (6). 4. Securely push the connector CN5 on the scanner board (A) all the way into the con- nector YC3 on the main PCB. 5. Fix the scanner board (A) to the controller- box cover with 2 screws (1). 6. Return the right sequence cover (6) and back upper cover (4) to their original posi- tions. GUIDE D’INSTALLATION du Systéme de Lecture Pour installation sur les copieurs ayant une vitesse de copie de 62/82 copies la minute (A4 latérale) Eléments fournis A Carte de lecture........................................1 Mettre le copieur hors tension à l’interrupteur principal et le débrancher de la prise secteur avant de démarrer la procédure. 1. Retirer les deux vis (1) bloquant le couvercle (2), puis retirer ce dernier. 2. Retirer les neuf vis (3) bloquant le couvercle supérieur arrière (4), puis retirer ce dernier. 3. Retirer les huit vis (5) bloquant le couvercle de séquence droit (6), puis retirer ce dernier. 4. Pousser fermement le connecteur CN5 de la carte scanner (A) à fond dans le connecteur YC3 de la carte de circuits imprimés (PCB) principale. 5. Fixer la carte scanner (A) au couvercle du boîtier de commandes à l’aide des deux vis (1). 6. Remettre les couvercles de séquence droit (6) et supérieur arrière (4) dans leur position d'origine. GUIA DE INSTALACION para el Sistema de Escaneo Para instalación en copiadoras con una velocidad de copiado de 62/82 páginas por minuto (A4 lateral) Piezas que se suministran A Tarjeta de escáner....................................1 Apague la fotocopiadora, colocando el interruptor principal de suministro eléctrico de red a su posición de apagado (OFF) y desenchúfela de dicho suministro antes de iniciar este procedimiento. 1. Quite los dos tornillos (1) y desmonte la cubierta (2). 2. Quite los nueve tornillos (3) y desmonte la cubierta trasera superior (4). 3. Quite los ocho tornillos (5) y desmonte la cubierta de secuencia derecha (6). 4. Empuje firmemente a tope el conector CN5 en la tarjeta (A) de escáner en el conector YC3 de la tarjeta PCB principal. 5. Apriete la tarjeta (A) de escáner a la tapa de la caja del controlador con 2 tornillos (1). 6. Vuelva a colocar en su posición original la cubierta de secuencia derecha (6) y la cubierta trasera superior (4). INSTALLATIONSANLEITUNG für Scansystems Für die Installation an Kopierern mit einer Kopiergeschwindigkeit von 62/82 Kopien pro Minute (A4 quer) Lieferumfang A Scannerkarte............................................1 Schalten Sie den Netzschalter des Kopierers aus, und trennen Sie das Gerät vom Netzstrom, ehe Sie mit der Installation beginnen. 1. Entfernen Sie die beiden Schrauben (1), um die Abdeckung (2) abzunehmen. 2. Entfernen Sie die neun Schrauben (3), um die hintere obere Abdeckung (4) abzunehmen. 3. Entfernen Sie die acht Schrauben (5), um die rechte Sequenzabdeckung (6) abzunehmen. 4. Stecken Sie den Stecker CN5 auf der Scannerkarte (A) sorgfältig vollständig in den Anschluß YC3 auf der Hauptplatine. 5. Befestigen Sie die Scannerkarte (A) mit den 2 Schrauben (1) an der Controllerkastenabdeckung. 6. Bringen Sie die rechte Sequenzabdeckung (6) und die hintere obere Abdeckung (4) wieder an ihren ursprünglichen Positionen an. GUIDA ALL’INSTALLAZIONE del Sistema di Scansione Per installazione su fotocopiatrici con velocitá di 62/82 copie al minuto (A4 laterale) Parti appartenenti alla dotazione A Scheda scanner ......................................1 Spegnere l’interruttore principale e sfilare la spina della copiatrice dalla presa, prima di procedere con le istruzioni di montaggio. 1. Rimuovere le due viti (1), quindi il pannello (2). 2. Rimuovere le nove viti (3), quindi il pannello posteriore superiore (4). 3. Rimuovere le otto viti (5), quindi il pannello destro della sequenza (6). 4. Spingere a fondo il connettore CN5 della scheda scanner (A) nel connettore YC3 della scheda principale. 5. Fissare la scheda scanner (A) al pannello della scatola di controller a mezzo delle 2 viti (1). 6. Rimettere il pannello destro della sequenza (6) e il pannello posteriore superiore (4) nella loro posizione originale. Italiano Deutsch Español Français English 1 A
Page 1 of 1

Compatible Models: Kyocera-SCanSystemH.
– Kyocera-SCanSystemH Installation-Guide: is a handbook published by Kyocera manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Kyocera-SCanSystemH Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Kyocera-SCanSystemH Installation-Guide:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Kyocera-SCanSystemH Installation-Guide.
1.3 Diagnostic all errors are generated by Kyocera-SCanSystemH Installation-Guide:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Kyocera-SCanSystemH.
1.5 How to update firmware Kyocera-SCanSystemH.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Kyocera-SCanSystemH: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Kyocera-SCanSystemH.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Kyocera-SCanSystemH Installation-Guide covers following topics:

– Precautions Kyocera-SCanSystemH.
– Product Specification Kyocera-SCanSystemH.
– System Overview Kyocera-SCanSystemH.
– S/W Structure and Descriptions Kyocera-SCanSystemH.
– Disassembly and Reassembly Kyocera-SCanSystemH.
– Alignment and Adjustments Kyocera-SCanSystemH.
– Troubleshooting Kyocera-SCanSystemH.
– Exploded Views & Parts List Kyocera-SCanSystemH.

Free Download Kyocera-SCanSystemH Installation-Guide

Kyocera-SCanSystemH Installation-Guide

Leave a Reply