E-1 [1] Accessory parts FT-107 INSTALLATION PROCEDURE Applied machine: FS-107 13GS97010 1 Spare tray No. Name Shape Q’ty [2] Installation procedure Caution: Up to two spare trays can be fitted between the two standard trays. Be sure to fix the spare tray from the upper position. 1. Turn off the power of the main body. 2. Fit the spare tray to the Finisher by inserting it into the circled position in the following figure. 3. Fix the spare tray to the Finisher. (P tapping screw M3x10: 2) 4. Fix the spare tray to the upper standard tray with the tray holder. (P tapping screw M3x10: 2) Spare tray Tray holder P tapping screw (M3x10 : 2) 5. Turn on the power of the main body, then press OUTPUT key to verify that the spare tray is de- tected on the screen. Caution: Be sure to wait till the Finisher stops its warming- up operation before pressing the OUTPUT key, oth- erwise the machine may not detect the spare tray newly attached. [Before] P tapping screw (M3x10 : 2) Spare tray [After] 1 2 Tray holder 1 3 P tapping screw M3x10 (Ni) 4 HOME
Page 1 of 1

Compatible Models: Konica-FT-107.
– Konica-FT-107 Installation-Guide: is a handbook published by Konica manufacturer or a specialized publishing company that contains instructions and specifications for the maintenance, repair, and how to fix all error of a specific Konica-FT-107 Printer. It may includes Exploded Views, Parts List, System Diagram, Disassembly and Reassembly, Alignment, Troubleshooting guides, Adjustments, hard reset code, factory reset…

You can do with Konica-FT-107 Installation-Guide:

1.1 Guide you from basic to advanced usage it.
1.2 Fluent Disassembly and Re-assembly Konica-FT-107 Installation-Guide.
1.3 Diagnostic all errors are generated by Konica-FT-107 Installation-Guide:
– The printer does not print.
– Paper does not feed into the printer.
– A print job is extremely slow.
– Half the page is blank.
– The paper keeps jamming, Paper Jam inside, Paper Jam Outside…
– The printer prints, but the text is wrong, garbled, or incomplete.
– Pages print, but are blank.
– The print quality of photos is not good. Images are not clear.
– Your printer has an odd smell during initial use.
1.4 How to refill toner/ink Konica-FT-107.
1.5 How to update firmware Konica-FT-107.
1.6 How to reset page counter by software, fix all error cause by ink/toner cartridge Konica-FT-107: Waste Ink Ink Pad Error, ink cartridge error, red light blinking, red-green light blinking, yellow blinking, Ink cartridge failure, waste ink over flow, ink out, ink level, incompatible ink cartridges, toner cartridge not competition, install toner cartridge, toner exhausted, toner low, toner empty, toner very low…How to use Adjustments Program.
1.7 How to fix main board error, print head, formater board error Konica-FT-107.
1.8 How to troubleshooting printer problem with low quality page .
1.9 How to fix : Communication Error, Model Difference, Cover open(Tray) Error, Paper Out Error, Paper Jam Error, Paper Mismatch Error, Ink Low, Ink End Error, No Ink Cartridge, CSIC Error, Maintenance Request Error, Fatal Error…
1.10 How to fix sensor error: empty image, imaging unit is not installed, sensor failure, turn off then on, fusser error, LSU error, Engine board problem, Flash ROM problem, Main motor problem, Sirocco fan problem, Power supply cooling fan problem, Suction fan problem, Polygon motor problem, Laser problem, Secondary transfer voltage contact/release problem, Transfer belt cleaner contact/release problem, Transfer belt rotation problem, Imaging rack rotation problem, Fuser roller temperature increase problem, Fuser roller low temperature problem, Fuser roller high temperature problem, Fuser roller thermistor problem, Transparency detection sensor problem, Main unit memory counter problem, Main unit memory data problem, Main unit memory access problem, Main unit memory installation problem, Engine communication error.

Konica-FT-107 Installation-Guide covers following topics:

– Precautions Konica-FT-107.
– Product Specification Konica-FT-107.
– System Overview Konica-FT-107.
– S/W Structure and Descriptions Konica-FT-107.
– Disassembly and Reassembly Konica-FT-107.
– Alignment and Adjustments Konica-FT-107.
– Troubleshooting Konica-FT-107.
– Exploded Views & Parts List Konica-FT-107.

Free Download Konica-FT-107 Installation-Guide

Konica-FT-107 Installation-Guide

Leave a Reply